Allen & Heath iDR-Switch

Allen & Heath iDR-Switch
Dieser Artikel steht derzeit nicht zur Verfügung!
-0,50 € * 0,00 € *

inkl. MwSt. zzgl. Versandkosten

Lieferzeit 4-7 Werktage

  • ST-121067
iDR-switch wall plates and other external equipment such as curtains, lights, custom panels, PIR... mehr
Produktinformationen "Allen & Heath iDR-Switch"
iDR-switch wall plates and other external equipment such as curtains, lights, custom panels, PIR sensors, etc. can be easily brought under iDR control using iDR-switch. A total of 3 iDR-switch units can be included in an iDR system, providing up to 72 switch closure inputs and 48 logic outputs.

Technical Specifications - iDR-switch

24 switch in 16 out logic expander for iDR-8. Up to 3 units may be daisy chained to iDR-8 Max 72 switch and 48 logic outputs

Switch Control
Examples Volume up/down, source select, patch recall, logic control
Action Unused or latching, press, release, stereo linking
Level control IP, XP, OP, GRP, up, down, up/down (using scroll keys), range limit
Mute control On, off, toggle Patch control Patch recall, patch select (using scroll keys)
Logic control PL remotes, iDR-switch logic outputs

Logic Control
Examples Status LEDs and bulbs, relays, motors, start/stop
Action Toggles open collector state

Front Panel
Status LEDs Link, power

Switch Inputs x 24
Connector 3x 10pin Phoenix, 8 switches per connector
Plug Mating screw terminal plugs supplied
Type Opto-isolated via 2k2 ohm from +10V
Operation Switch closure to connect pin to ground (5mA)
Cable 1k ohm max resistance

Logic Outputs x 16
Connector 4x 10pin Phoenix, 4 outputs per connector
Plug Mating screw terminal plugs supplied
Type Opto-isolated open collector
Terminals Floating collector (+) and emitter (-) pins
Internal DC source +10V, 500mA total max External DC source Up to +24V 200mA sink per output max

DR-Link
Application Logic control from iDR-8
Connection RJ45 x2 (in, out to next unit)
Protocol Proprietary Allen & Heath
Cable CAT5 STP up to 300 metres (1000 feet)

Power Supply
Type Universal input switched mode
Connector IEC 3pin
Power lead supplied Country dependent
AC mains input 100-240V AC 50/60Hz
Power consumption 15VA max
Fuse T500mA 20mm
Power switch Rear panel mains on/off

Mechanical specifications (in mm)
Removeable ears for desk or rack mount
iDR-switch Width Height Depth
Desktop 440mm / 17.3 48mm / 1.9 148mm / 5.8
Rack 486mm / 19 44mm / 1.75 (1U) 148mm / 5.8

Unpacked weight 3.5kg / 7.7lb
Packed weight 4.5kg / 10lb
Weiterführende Links zu "Allen & Heath iDR-Switch"
Zuletzt angesehen