Ecler DPA 1000

Dieser Artikel steht derzeit nicht zur Verfügung!
-0,50 € * 0,00 € *

inkl. MwSt. zzgl. Versandkosten

Lieferzeit 4-7 Werktage

  • ST-12066
Die Ecler DPA-Serie ist für den professionellen Anwendungs/- und Installationbereich konstruiert.... mehr
Produktinformationen "Ecler DPA 1000"
Die Ecler DPA-Serie ist für den professionellen Anwendungs/- und Installationbereich konstruiert. Sie verfügt über einen Slot zur Aufnahme von Ecler DSP-Modulen wie z.B. dem AMIC Modul. Das AMIC Modul (10 Band EQ, Xover, Limiter, Delay) ersetzt dabei praktisch das Lautsprecher-Management-System.


- Leistung: 4 Ohm - 440 W RMS pro Kanal, 8 Ohm - 275 W RMS pro Kanal
- Ground Lift
- Eingänge: 2x XLR-female
- NF-Ausgänge: 2x parallel-Out Klinke
- LS-Ausgänge: 2x Neutrik Speakon

The DPA amplifier series were specially developed for fixed installations, even though they can be used for mobile applications due to their features. The DPA amplifiers combine renowned SPM (1) technology, which has been developed and patented by Ecler with the possibility to optionally incorporate processors like the digital module amic, which can be configured with a PC over USB and allows an comprehensive audio signal processing.

Most important features

* Input gain control on front panel with protection against undesired manipulation
* Signal present indicator (above -40dB) and clip indicator (1,5dB before actual clipping)
* Balanced inputs with XLR connectors
* Balanced stack-out outputs on jack connectors
* Power outputs with speak-on connectors
* Subsonic filter and integrated anticlip
* Connection possibility of TAWA, UCM 20 or AMIC modules at the rear panel
* Temperature controlled cooling system
* Completely and effectively protected
* All models are 2 rack units high

The possibility to install processing cards directly into the amplifier, allows a complete adjustment to the requirements of the audio system, as well as protection against undesired manipulation.


Three types of processing modules for different needs. The digital card AMIC allows a comprehensive processing of audio signals through easy parameter setting with Ecler’s specific amiclab software. The amic module can be configured by connecting it to a PC, without necessity of being connected to the power amplifier. It has been designed specifically for installation into amplifiers from the DPA series with Ecler’s SPM technology. Its exceptional audio processing features turn it into a highly versatile tool:

* Independent 4-way outputs: 2 internal and 2 external
* Parametric EQ with 10 filters for each way
* Gain adjustment for each way
* Crossover with selectable slope and type
* Delay
* Limitador compresor
* Phase inverter
* Signal generator
* Graphic display for curves
* Password protected configuration
Weiterführende Links zu "Ecler DPA 1000"
Zuletzt angesehen